Content | Fast Charge your EV at 3.7kW or 7.4kW (8 hours or 4 hours respectively for a 30kw Battery).
Strong Impact resistant from a 1 meter drop onto concrete. Dust and splash-resistant with an IP Rating* of 54 when mated.
Comfortable The contoured grip fits in your palm comfortably allowing for easy insertion and removal of the plugs.
Compatible Suitable for all Type 2 electric vehicles including Tesla, Jaguar, Renault, Kia, BMW, Ford, Audi, Vauxhall, Nissan, MG, Mercedes, Hyundai. 32A cables are backward compatible with 16A supplies.
All Our Cables Come with an industry-leading 2 year warranty and a free bag.
* What is IP54 Rating?
The IP54 (Ingress Protection Rating) means our cables will operate in dusty conditions and will resist splashes of water while mated. However, the charging process is not fully water sealed and the cables should not be submerged in water or operated in the rain.
Single Phase Wire Information
16A: 3G2.5mm2+2*0.5mm2 EV Wire (AC) / 11mm Diameter
16A Single Phase ( 3G2.5mm2+2*0.5mm2)
32A:366.Omm2+2*0.5mm² EV Wire (AC) / 15mm Diameter
32A Single Phase ( 3G6.Omm2+2*0.5mm2)
Charging Cable Safety
- The cable should be kept out of puddles but can be kept outside.
- Please remember to use the rubber cover to keep moisture from the connector when not in use. The vehicle will not charge if it senses moisture.
- Moisture is the most common issue experienced and will lead to corrosion of the pins which are not covered by our warranty.
Why can't we charge in the rain?
Water can still get into the plug and charging socket during the inserting and removing of the plug from the car. In fact, as soon as you open the charge port or unplug your car, the rain will get onto the pins and stay there until the next time you charge.
QUESTION 1: WHAT WILL YOU BE USING IT FOR?
Are you planning to use it for charging from
a) your domestic socket
b) a home EV charge point or
c) public charge points?
The answer may be a combination but for A you'll need to be aware that in this case, you'll actually need what's known as a portable charger.
If that's what you're after, just take a look at our portable EV chargers.
But let's assume it's for B or C or a combination of both.
QUESTION 2: WHAT TYPE OF CONNECTOR DOES YOUR CAR USE?
Different electric vehicles use different connectors; type 1, type 2, type 3C (which is the standard used throughout Italy and France).
You can find out what type your car uses, by selecting it on our site here.
Most public charge points use a type 2 connector so you'll likely want and type 2 to whatever your car connector is.
|
|
Type 1 plugs are single-phase and allow for fast charging at a power output level of 3.7kW-7.4kW AC and a range per hour of approximately 12.5-25 miles. The design features 5-pins. This plug is mostly used with car models found in parts of Asia, and less so in Europe. It may be difficult to find Type 1 chargers and charging stations in the UK. |
This is a 7-pin plug design that is the standard for the European market. It offers fast charging capability with a power output level of 3.7kW-7kW AC. This provides an approximate range per hour of charging of 12.5-25 miles. One exception to this standard is Tesla Superchargers. They provide DC on Type 2 connectors. The output level is 130kW with a range per hour of 180 miles. |
QUESTION 3: WHAT CURRENT AND PHASES DO YOUR CAR SUPPORT?
There are two additional factors outside of the connector type:
1. Current
Standard power output levels of regular public charging stations are 3.6kW and 7.4kW which will correspond to the 16 Amp or 32 Amp supply. But you'll also need to know what your car supports, because for instance, an electric vehicle whose onboard charger has the capacity of 3.6kW, will only accept current up to 16 Amp and even if a 32 Amp charging cable is used and plugged into a 7.4kW charging point, the charging rate won’t be increased; neither it will reduce the charging time.
2. Phases: Single or 3 Phase
Phases are simply the number of power lines that run within the cable. More phases equal faster charging, but only if your car and the charge point support it. You also have to keep in mind that 3 phase cables are thicker and heavier than single-phase to carry around.
Again you can get the answers to these questions for your specific car, by searching here.
SUMMARY
Armed with this information you'll easily be able to choose the cable that suits your needs.
Coocar offer both cables from stock (same day dispatch before 11am, next working day after) or made-to-order cables if you can't find what you're looking for from stock (3 - 6 days dispatch). | This steering wheel kit is suitable for Telsa Model 3/Y. You can change the color or style of the steering wheel according to your taste and preference to create the appearance color you want. There is no need to exchange your steering wheel.
Note:
1.Delivery time: About 20days
2.This steering wheel is the customized product, no refund or return without quality problems
3.There is no white lamp after change the middle carbon fiber trim panel. If you mind, please do not select the option to change the middle trim panel. If not select the option to change the middle trim panel, we will not send any middle trim panel. Please install it with your original car middle trim panel
4.if you need the heating function, pls leave your note when place the order
Only if the original steering wheel has the heating function, the refitted steering wheel can use the heating function
Yoke Style Steering Wheel: Click Here
Racing Style Steering Wheel: Click Here
Features:
-Ergonomic design to handle long hour of driving
-Racing inspired aerodynamics and style
-Made off a factory steering wheel to ensure OEM quality and fitment
-Made with 100% Real carbon fiber
-Made with Real Leather and Alcantara
How to distinguish your Model Year?
The difference For Model Y Steering Wheel
- Made in Shanghai, China and delivery after Sept. 2021
- Made in Berlin,Germany and delivery after April,2022
Note:
1.Delivery by Fedex. Support wholesale, OEM group purchasing at a very good price.
2.For the steering wheel airbag cover, if you have any requirements on airbag cover,pls note it when place the order; if not, we will make it with the following default standards for the airbag cover:
- Alcantara leather: Alcantara leather + red color stitching
- White Nappa leather: White Nappa leather + white color stitching
- Black Nappa leather: black Nappa leather + black color stitching
- black perforated/normal leather: black normal leather + black color stitching
- Tesla Logo: silver logo without carbon fiber by default | NOTE: THIS BUMPER TAIL LIGHT IS NOT APPLICABLE FOR MODEL 3 2022+ CURRENTLY.
This rear bumper tail light convert the original rear bumper reflectors to functional LED light. Replace the original plastic reflect sheet and also upgrade your car appearance.
Custom-designed: This rear bumper tail light is compatible with Tesla Model Y/3
Functional effect:
- Brake: Flash
- Turn Signal: Outward running light
- Head Light : Turn on while head light is on
Safety Driving: Effectively increase the safety of driving in rainy, foggy and snowy days. Keep the following cars at a distance which will be safer when driving | Pls check your Car CPU Version and select the correct version when place your order. If you are not sure for the version info, contact us for further confirmation.
How to confirm your car CPU version(Intel Atom/AMD Ryzen)?
Check on the screen of the original vehicle :
vehicle icon - software > vehicle information > extra information > CPU
Avant-garde intelligent design with 8 kinds of intelligent switch make you full of dignity, when opening or closing the door, Auto presenting doors can meet different needs, allowing you to travel and enjoy the journey easily
Functions:
– Mobile App control to open the door
– Use the key card to open and close the door
– Step on the brake to close the door
– Press the door handle to open and close the door
– Press the door panel button to open and close the door
– Use the remote key to open the door
– Gently push the door to close the door
– Press the added button to open and close the door
– The opening angle can be adjusted
Adjustment mode: long press the key button for 3S, and the door opening angle will be set successfully after hearing a prompt tone.
Function Description:Click Here
Installation Manual: Click Here
Note:
1. Once make the order, order confirm and shipping email will send to your mail box automatically. If you did not see it in your email box, please check your spam email box or contact service@coocar.com.
2.If you have any problems during installation, please contact our after-sales team in time, and we will help you to solve your problems.
3.The problems caused by incorrect installation shall be borne by yourself.
4. 1 year warranty |
NOTE: 1. Not the Tesla OEM Adapter. 2. Lead time: Ships in Early October
Applicable vehicles: Model 3, Model Y, Model S, Model X Rated Power: 500 Vd.c, 300 Ad.c. Up to 250 kW charging rate
ALLOW ACCESS TO THIRD-PARTY CCS CHARGING NETWORKS - Hansshow CCS 1 adapter for Tesla let you charge access at over 5,000 CCS fast chargers nationwide. FAST CHARGING - Up to 250W power rate of CCS combo 1 adapter allows you to fully charge within a matter of hours.
(Note: Charge rate will also depend on the specifications of the charging station)
COLD AND HEAT RESISTANT - Hansshow CCS combo 1 adapter works perfectly at operating temperatures from - 22 ° f to 122 ° F
PORTABLE-This Hansshow CCS1 charging adapter is compact and portable, easy to store and use for charging, just pull it up, connect it to the CCS1 charger, and then charge your Tesla quickly.
TESLA COMPATIBLE -The CCS Combo 1 Adapter is compatible with Tesla Model S3XY vehicles. How to check compatibility? Please read the description details below.
NOTE:
1. Not the Tesla OEM Adapter.
2. Lead time: Ships in Early October
How To Verify Compatibility Of COOCAR CCS 1 Adapter On Your Tesla In The Car Display
Open Additional Vehicle Information under the Software tab of the car settings page and check for "CCS adapter support" info.
Control>Software>Additional Vehicle Informantion> CCS Adapter Support-Check If Enabled
32A Portable EV Charger Description
IP Degree |
IP65 |
Rate Current |
16A/32A |
Rate Power |
3.5kW/7kW |
Frequency |
50/60Hz |
Input/Output Voltage |
AC100~240V |
Working Temperature |
-25℃~+55℃ |
FASTER CHARGING - 32A portable EV charger is compatible with most electric vehicles on the market, including Tesla, use with Hansshow CCS Combo 1 adapter and the charging speed is faster than other types of chargers several times. Tesla needs to use with j1772 charger.
SAFETY PROTECTION - Hansshow NEMA 14-50 plug charger is made of high-quality ABS material, which is waterproof and does not break. At the same time, the charger has overcurrent protection, overvoltage protection, under-voltage protection, leakage protection, and overheating protection. Absolutely safe charging to avoid any accident.
LED SCREEN DISPLAY - Hansshow portable EV charger with a clearly LED screen can show the charging time, charging power and working temperature, etc.
| Features for Version 4 :
1. Small size, original factory style 1:1 design
2. The installation process is simple, no wiring is required, and the plug is directly plugged in
3. Fast installation time, one door only needs 30 minutes to install
4. Manufactured using mature technology, good stability, waterproof, no noise
Installation Manual: Click Here
Soft Close Door (v3): Click Here |
Additional information |
Length: |
10M, 2M, 3.5M, 5M, 7.5M
|
Current: |
16A / 3.7KW, 32A / 7.4KW
|
Color: |
Black, Blue, Yellow
|
| |
Car Model: |
Model 3 2017-2021, Model Y
|
Style: |
Fishbone Style, Simple Style
|
|
Car Model: |
Model 3 2017-2020, Model 3 2021+, Model Y
|
Driver Side: |
Left Hand Drive / LHD, Right Hand Drive / RHD
|
Auto Presenting Door: |
Front Left Door, Front Right Door, Front Right Door+Front Left Door
|
Soft Close Door: |
No, Yes(V4 Rear 2 doors)
|
Car CPU Version: |
AMD Ryzen, Intel Atom
|
| |
Car Model: |
Model 3 2017-2018, Model 3 2019-2020, Model 3 2021+, Model Y
|
|
Reviews
There are no reviews yet.