Content | Product Name: Rearview Mirror Cover
Applicable Model: Model 3/Y
Material: Real dry carbon fiber
Specification: 2pcs / set
Workmanship: Autoclave dry carbon workmanship
Installation method: special double sided adhesive tape for vehicle | If your Model 3/Y performance Maded in China and delivered after 2021/12+ , pls check your CPU version and select the correct version when place your order.
How to confirm your car CPU version?
Check on the screen of the original vehicle :
software > extra information > CPU
Our auto present door handles kit for Model 3/Y allows you open the doors without pushing and pulling the door handle! This kit is perfectly compatible with our soft closing doors kit!
New Arrival - Highlight 64 color door handle welcome light:
- When the door handle pops up, press the internal button to switch the color(default colors: dazzle color, streamer, red, green, blue, white, ice blue, orange and purple)
- The welcome light follows the turn signal light with the double flashing warning light. The four doors flash at the same time, effectively improving the driving safety (if you don't need the turn signal function, pls note it when place your order.)
- Upgraded the independent Bluetooth function, without relying on the Bluetooth system of the original vehicle, no matter how long the Bluetooth protocol mobile phone leaves the vehicle; When approaching the vehicle again, the four door handles can pop up automatically even when the vehicle is dormant
Auto Door Handle V3:
– all-in-one door handle kit without assembly
- Simple installation and Fast installation time
Auto Door Handle Function Description
- when the mobile phone turns on Bluetooth and the original car senses it within 10m, the door handle automatically opens; if disconnects Bluetooth or 10m away from the car, or the door handle extends out for 10 seconds, the door handle will retract itself; or when operate to unlock via remote app, the door handle will pop up automatically; when lock the car, the handle will retract automatically.
- when the key fob’s Bluetooth is sensed by the original vehicle within the range of 10m, the door handle will pop up automatically; if 10m away from the car, or the door handle extends out for 10 seconds, the door handle will retract itself; Press the unlock button of key fob 2 times, the door handle will unlock and pop up; and press lock button to retract
- Swipe the key card on the A-pillar of the driver side, the door handle will unlock and pop up automactically; Swipe the key card again, the door handle will retract itself.
- Press the unlock icon on the large screen in the car, the door handle will pop up automatically, and press the lock icon, the door handle will retract itself. 5.Switch to P-gear in the car, the door handle will pop up automatically; Switch to D, N and R gear, the door handle will retract itself
Note:
1. Once make the order, order confirm and shipping email will send to your mail box automatically. If you did not see it in your email box, please check your spam email box or contact service@coocar.com.
2. This product can be installed by yourself or contact us to get installer information.
3. Please read the installation instructions carefully before installing this product. If you have any questions, please contact support@coocar.com to get installation technical support.
4. 1 year warranty | This steering wheel kit is suitable for Telsa Model 3/Y. There is no need to exchange your steering wheel.
Note:
1.Delivery time: About 10 days
2.This steering wheel is the customized product, no refund or return without quality problems
3.Default equipped with Middle Trim Panel, There is no white lamp after changed the middle carbon fiber trim panel. If you mind, Please install it with your original car middle trim panel
4.if you need the heating function, pls leave your note when place the order
The heated function is ONLY applicable for Model 3/Y comes with built-in heated steering wheel.
The heating wheel needs to use the heating harness of the your original vehicle.
Features:
-Ergonomic design to handle long hour of driving
-Racing inspired aerodynamics and style
-Made off a factory steering wheel to ensure OEM quality and fitment
-Made with 100% Real carbon fiber
-Made with Full Carbon Fiber
Yoke Carbon Fiber Steering Wheel, Click Here
How to distinguish your Model Year?
The difference For Model Y Steering Wheel
- Made in Shanghai, China and delivery after Sept. 2021
- Made in Berlin,Germany and delivery after April,2022
Note:
1. We support individual customization, contact us to get more information.
2.For the steering wheel airbag cover,
- Tesla Logo: silver logo without carbon fiber by default |
NOTE: 1. Not the Tesla OEM Adapter. 2. Lead time: Ships in Early October
Applicable vehicles: Model 3, Model Y, Model S, Model X Rated Power: 500 Vd.c, 300 Ad.c. Up to 250 kW charging rate
ALLOW ACCESS TO THIRD-PARTY CCS CHARGING NETWORKS - Hansshow CCS 1 adapter for Tesla let you charge access at over 5,000 CCS fast chargers nationwide. FAST CHARGING - Up to 250W power rate of CCS combo 1 adapter allows you to fully charge within a matter of hours.
(Note: Charge rate will also depend on the specifications of the charging station)
COLD AND HEAT RESISTANT - Hansshow CCS combo 1 adapter works perfectly at operating temperatures from - 22 ° f to 122 ° F
PORTABLE-This Hansshow CCS1 charging adapter is compact and portable, easy to store and use for charging, just pull it up, connect it to the CCS1 charger, and then charge your Tesla quickly.
TESLA COMPATIBLE -The CCS Combo 1 Adapter is compatible with Tesla Model S3XY vehicles. How to check compatibility? Please read the description details below.
NOTE:
1. Not the Tesla OEM Adapter.
2. Lead time: Ships in Early October
How To Verify Compatibility Of COOCAR CCS 1 Adapter On Your Tesla In The Car Display
Open Additional Vehicle Information under the Software tab of the car settings page and check for "CCS adapter support" info.
Control>Software>Additional Vehicle Informantion> CCS Adapter Support-Check If Enabled
32A Portable EV Charger Description
IP Degree |
IP65 |
Rate Current |
16A/32A |
Rate Power |
3.5kW/7kW |
Frequency |
50/60Hz |
Input/Output Voltage |
AC100~240V |
Working Temperature |
-25℃~+55℃ |
FASTER CHARGING - 32A portable EV charger is compatible with most electric vehicles on the market, including Tesla, use with Hansshow CCS Combo 1 adapter and the charging speed is faster than other types of chargers several times. Tesla needs to use with j1772 charger.
SAFETY PROTECTION - Hansshow NEMA 14-50 plug charger is made of high-quality ABS material, which is waterproof and does not break. At the same time, the charger has overcurrent protection, overvoltage protection, under-voltage protection, leakage protection, and overheating protection. Absolutely safe charging to avoid any accident.
LED SCREEN DISPLAY - Hansshow portable EV charger with a clearly LED screen can show the charging time, charging power and working temperature, etc.
| t's an exciting exploration of the world of intelligent vehicle technology. Model 3 power trunk V7 and power frunk V5 create a system where control is 100% on your hands. They can both be open and close through multiple control methods:
- dashboard touch screen (latest version Exclusive)
- model 3 key fob
- smartphone/smartwatch (official Tesla App/Siri assistant)
- foot sensor (optional): Trunk only
- tailgate button
- 1 year warranty
For 2021+ Model 3 Power Frunk :
Pls check your original bracket before place the order
Old Bracket :
Model 3 2021 + Made in USA
Model 3 2021/01-2021/05 Made in China
New Bracket :
Model 3 2021/06+ Made in China
Bracket Different: Click Here
Note:
1. Once make the order, order confirm and shipping email will send to your mail box automatically. If you did not see it in your email box, please check your spam email box or contact service@coocar.com.
2.If you have any problems during installation, please contact our after-sales team in time, and we will help you to solve your problems.
3.The problems caused by incorrect installation shall be borne by yourself.
For installation services:
If you need installation services, we will contact you and provide relevant installer information according to your order. The specific installation cost depends on your city location. | This steering wheel kit is suitable for Telsa Model 3/Y.
Note:
1.Delivery time: About 20 days
2.This steering wheel is the customized product, no refund or return without quality problems
3.Default equipped with Middle Trim Panel, There is no white lamp after changed the middle carbon fiber trim panel. If you mind, Please install it with your original car middle trim panel
4.if you need the heating function, pls leave your note when place the order
Only if the original steering wheel has the heating function, the refitted steering wheel can use the heating function
Yoke Style Steering Wheel: Click Here
Features:
-Ergonomic design to handle long hour of driving
-Racing inspired aerodynamics and style
-Made off a factory steering wheel to ensure OEM quality and fitment
-Made with 100% full carbon fiber
How to distinguish your Model Year?
The difference For Model Y Steering Wheel
- Made in Shanghai, China and delivery after Sept. 2021
- Made in Berlin,Germany and delivery after April,2022
Note:
1. We support individual customization, contact us to get more information.
2.For the steering wheel airbag cover,
- Tesla Logo: silver logo without carbon fiber by default |
Additional information |
Car Model: |
Model 3, Model Y
|
Carbon Finish: |
Gloss, Matte
|
Style: |
Ox Horn Style, Simple Style
|
|
Door Handle Version: |
Version 3
|
Door Handle Light: |
Blue Light, Color Light, White Light
|
Door Handle Finish: |
Carbon Fiber Style, Matte Black, Sliver
|
Car Model: |
Model 3 2017-2020, Model 3 2021+, Model Y
|
Car CPU Version: |
AMD Ryzen, Intel Atom
|
| | |
Power Frunk: |
2017-2020(V4.3), 2021/01-05 Made in China, 2021/06+ Made in China, 2021+ Made in USA, No
|
Power Trunk: |
2017-2018, 2019-2020, No
|
Trunk Kick Sensor: |
2017-2020, 2021+, No
|
| |
Reviews
There are no reviews yet.